Ricoh PRIPORT JP1250 - Manual (Page 54)

Operation
34
1
❒ Master length = actual original
length
×
Enlargement/Reduction
ratio
❒ Any image closer than 5mm, 0.2"
to the leading edge of the first orig-
inal will not be printed. Also, any
image closer than 4mm, 0.16" to
the leading edge of the second
original will not be printed. When
the image is too close to the leading
edge, use copies of the originals
with the image shifted at least
5mm, 0.2" for the first original
(4mm, 0.16" for the second origi-
nal) from the leading edge.
❒ You can select different image set-
tings for the first and second origi-
nal.
❒ Make sure that the paper feed side
plates touch the paper lightly
when using the Combine Copies
function. If they do not, the two
original images will not appear at
the proper position on the prints.
Reference
For how to use the optional docu-
ment feeder with this function, see
⇒
P.30 “Memory Mode—Group
Printing from Different Originals”.
A
Press the
{{{{
Combine
}}}} key once or
more to select the type of combine
(see below).
B
Set the first original face down.
Note
❒ The first original will be printed
on the leading part of the print.
Minimum Maximum
A4 drum
model 91 mm,
3.6" 198 mm,
7.7"
B4 drum
model 91 mm,
3.6" 243 mm,
9.5"
B4 drum A4 drum
Number of Key presses
1 A4 LL →
A4
A4 LL →
A4
2 A4 LL →
B4
71-141%
(Manual Set-
tings)
3 B4 LL →
B4
No Combine
4 71-141%
(Manual Set-
tings) ——
5 No Combine ——
TSLY01AE
SilverV-gb.book Page 34 Monday, May 15, 2000 3:32 PM