Ricoh PRIPORT JP1250 - Manual (Page 32)

Operation
12
1
Tint Mode—Halftone Printing
Use the
{
Tint/Economy
} key to make
halftone prints.
A
Press the {{{{
Tint/Economy
}}}} key to se-
lect Tint mode (Upper indicator).
B
Set your originals on the exposure
glass or in the optional document
feeder.
C
Press the {{{{ Start }}}} key.
D
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {
Image
Position } keys (see ⇒
P.9 “Ad-
justing the Print Image Position”)
or the side tray fine adjusting
dial (see
⇒
P.10 “Shifting the
Print Image Position to the Right
or Left”).
E
Enter the number of prints with
the number keys.
F
Press the {{{{ Print }}}} key.
GRTINT0E
TSLS012E
TSLS014E
SilverV-gb.book Page 12 Monday, May 15, 2000 3:32 PM