1printing on thick or thin paper, Pressure lever position – Ricoh PRIPORT JP1250 User Manual

Page 43

Advertising
background image

Printing on Thick or Thin Paper

23

1

Printing on Thick or Thin Paper

When you make prints on thick (127.9
to 209.3g/m

2

, 34.0 to 55.6 lb), stand-

ard (52.3 to 127.9g/m

2

, 13.9 to 34.0 lb)

or thin (47.1 to 52.3g/m

2

, 12.5 to 13.9

lb) paper, perform the following
steps.

Pressure Lever Position

A

Position pressure lever to thick,
standard, or thin paper position.

Note

❒ When you use paper heavier

than 127.9g/m

2

, 34.0 lb and

lighter than 209.3g/m

2

, 55.6 lb,

position pressure lever to the
Thick paper position.

❒ When you use paper heavier

than 52.3g/m

2

, 13.9 lb and light-

er than 127.9g/m

2

, 34.0 lb, posi-

tion pressure lever to the
Standard paper position.

❒ When you use paper heavier

than 47.1g/m

2

, 12.5 lb and light-

er than 52.3g/m

2

, 13.9 lb, posi-

tion pressure lever to the Thin
paper position.

❒ In the case of paper smaller than

B5, 5

1

/

2

"

×

8

1

/

2

" and heavier

than 81.4g/m

2

(21.6 lb), move

the feed roller pressure lever to
the Thin paper position.

B

Make sure that paper feed side
plates touch the paper lightly.

C

When you finish prints, position
pressure lever to the Standard pa-
per position.

TSLH01CE

ZCTH150E

TSLH01CE

SilverV-gb.book Page 23 Monday, May 15, 2000 3:32 PM

Advertising
This manual is related to the following products: