Printing in two colours – Ricoh PRIPORT JP1250 User Manual
Page 74
Optional Functions
54
2
Printing in Two colours
After printing in one colour, you can
print in another colour on the same
side of the print.
Important
❒ Leave the prints for a while before
printing on them again to let the
ink dry.
❒ If the prints are not dry, the paper
feed roller might become dirty. In
this case, wipe off the roller with a
cloth.
Note
❒ You cannot print in two colours at
one time.
A
Prepare the two originals. Set the
first original on the exposure
glass.
B
Press the
{{{{
Start
}}}} key.
C
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the
{
Image
Position
} keys (see
⇒
P.9 “Shift-
ing the Print Image Position For-
ward or Backward”) or the side
tray fine adjusting dial (see
⇒
P.10 “Shifting the Print Image Po-
sition to the Right or Left”).
D
Enter the number of prints with
the number keys.
E
Press the
{{{{
}}}} key.
GRPREP0E
TSLS012E
TSLS011E
TSLS014E
SilverV-gb.book Page 54 Monday, May 15, 2000 3:32 PM