Ricoh PRIPORT JP1250 - Manual (Page 29)

Adjusting the Print Image Position
9
1
Adjusting the Print Image Position
After master making, you can adjust
the print image position to suit your
needs. There are two ways:
❖ ❖ ❖ ❖ Shifting the Image Position Forward
or Backward
Shift the image position using the
{ Image Position } keys.
❖ ❖ ❖ ❖ Shifting the Image Position to the
Right or Left
Shift the image position using the
side tray fine adjusting dial.
Shifting the Print Image
Position Forward or Backward
* Paper feed direction
A
Press the left
{{{{
Image Position
}}}} key
to move the image forwards, the
right key to move it backwards.
Note
❒ When you shift the image for-
wards, leave a margin (more
than 5mm, 0.2") at the leading
edge. If there is no margin, pa-
per might wrap around the
drum and cause a misfeed.
❒ The right or left { Image Position }
keys shift the image about
0.5mm, 0.02" each time they are
pressed. When the indicator
changes, the image position
shifts about 5mm, 0.2".
B
Press the
{{{{
Proof
}}}} key to check the
image position.
GRFORW0E
TSLS015E
TSLS013E
SilverV-gb.book Page 9 Monday, May 15, 2000 3:32 PM