Ricoh PRIPORT JP1250 - Manual (Page 132)

Remarks
112
6
Power Connection
R WARNING:
R CAUTION:
R CAUTION:
❖ ❖ ❖ ❖ Main Frame
• Make sure the plug is firmly inserted in the outlet.
Access to Machine
Place the machine near the power source, providing clearance as shown.
❖ ❖ ❖ ❖ Main Frame
1. More than 20 cm, 8.0"
2. More than 60 cm, 23.7"
3. More than 60 cm, 23.7"
4. More than 60 cm, 23.7"
• Only connect the machine to the power source described on the inside
front cover of this manual. Connect the power cord directly into a wall
outlet and do not use an extention cord.
• Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it. Do not pull it hard nor bend it more
than necessary. These actions could cause an electric shock or fire.
• Unplug the power cord from the wall outlet before you move the equipment.
While moving the equipment, you should take care that the power cord will
not be damaged under the equipment.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
1
3
2
4
GRINST0E
SilverV-gb.book Page 112 Monday, May 15, 2000 3:32 PM