When a message is displayed, 3when a message is displayed – Ricoh Aficio RPCS MP 2000 User Manual

Page 28

Advertising
background image

Troubleshooting When Using the Facsimile Function

22

3

When a Message Is Displayed

This section describes the machine's main messages. If other messages appear,
follow their instructions.

Message

Cause

Solution

Error occurred,

and trans. was

cancelled.

A document jam occurred during
Immediate Transmission. There
may be a problem with the ma-
chine or the telephone line (for ex-
ample, noise or cross talk).

Press [Exit], and then resend the
pages that have not been sent.

If the error reoccurs frequently,
contact your service representative.

Put original

back, check it

and press Start

key.

Original jammed during Memory
Transmission.

Place originals that have not been
scanned on the exposure glass,
ADF or ARDF again.

Cannot detect

original size.

Place original

again, then

press Start key.

The machine failed to detect the
size of the original.

Place original again, and then
press the {Start} key.

LFunc. Problems

Data will be

initialized.

There is a problem with the fax.

Record the code number shown
in the display and contact your
service representative.

Other functions can be used.

Memory is full.

Scanning will be

stopped and only

scanned page(s)

will be stored.

The memory is full.

If you press [Exit], the machine re-
turns to standby mode and starts
transmitting the pages that have
been stored.

Cannot send fax

as scanner is in

use by another

function.

The machine is scanning an origi-
nal under another function.

Before sending the fax, cancel the
current scan job under the other
function. To do this, press the
{Clear/Stop} key on the control
panel to display the message

Clear/Stop key was

pressed. Stop scan-

ning?

”, and then press [Stop].

Updating the

settings... Re-

select

dest./func-

tions after up-

date finishes.

The destination list is being up-
dated from the network using
SmartDeviceMonitor for Admin
or Web Image Monitor.

Wait until the message disap-
pears. Do not switch off the pow-
er while this message is
displayed.

Advertising
This manual is related to the following products: