Ricoh Aficio RPCS MP 2000 - Manual (Page 80)

Adding Paper and Replacing Toner
74
6
K
Adjust the tray size to the new paper size using the paper size selector.
L
Push the paper tray in until it stops.
Note
❒ When setting small quantities of copy paper, be careful not to squeeze in
the side fence too much. Paper might not feed in properly if the side fences
are too tight against the paper's edges.
❒ Be sure to set the correct size, otherwise a paper jam might occur.
When Using 11"
×17" Size Paper
This procedure explains how to change the paper size to 11"×17".
A
Set the paper size selector to “p”.
B
Press the {User Tools/Counter} key.
C
Select [System Settings] using {U} or {T}, and then press the {OK} key.
ASB027S