Ricoh Aficio RPCS MP 2000 - Manual (Page 63)

When a Message Is Displayed
57
5
Cannot detect
original size
Select scan
size.
You have loaded paper of a size not
shown on the paper size selector. • Place the original correctly.
• Specify the scan size.
• When placing an original di-
rectly on the exposure glass,
the lifting/ lowering action of
the ADF or ARDF triggers the
automatic original size detec-
tion process. Lift the ADF or
ARDF by more than 30 de-
grees. See “Placing Originals”,
Copy Reference.
Exceeded max.
number of search
results which
can be dis-
played. Max.:
nnn
(A figure is placed at
n.)
Search results have exceeded the
max. displayable number. Search again after changing the
search conditions.
You do not have
privileges to
use this func-
tion.
Privileges to use this function. Contact the administrator.
LDAP server
search timed
out. Check the
server status.
A network error has occurred and
connection has failed. Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of System Set-
tings. See “Administrator Tools”,
General Settings Guide.
Specified group
contains some
invalid dest. Do
you want to se-
lect only valid
dest.?
The specified group contains
some destinations for sending by
e-mail and some destinations for
sending by Scan to Folder. To select destinations for sending
by e-mail, press [Select] for the
message displayed on the e-mail
screen. To select destination for
sending by Scan to Folder, press
[Select]
for the message displayed
on the Scan to Folder screen.
Connection has
failed. Check
settings and
check Scanned
File Status.
The correct network settings are
not made. • Check the network settings of
the client computer.
• Check that components such
as the LAN cable are connect-
ed properly.
• Check that the server settings
are correct and the server is
working properly.
Message Cause Solution