Ricoh Aficio RPCS MP 2000 - Manual (Page 29)

When a Message Is Displayed
23
3
Updating desti-
nation list. Re-
select
destination(s)
or sender's name
later.
The destination list is being up-
dated from the network using
SmartDeviceMonitor for Admin
or Web Image Monitor. Wait until the message disap-
pears. Do not switch off the pow-
er while this message is
displayed. Depending on the
number of destinations to be up-
dated, there may be some delay
before you can resume operation.
Operations are not possible while
this message is displayed.
You do not have
privileges to
use this func-
tion.
Use of this function is restricted. Contact the administrator.
Authentication
failed.
Wrong login user name or password. Confirm correct login user name
or password.
Authentication
failed.
Authentication is not possible
from this machine. Contact the administrator.
Connection with
LDAP server has
failed. Check
the server sta-
tus.
A network error has occurred and
connection has failed. Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of [System Set-
tings]
. See “Administrator Tools”,
General Settings Guide.
LDAP server au-
th. has failed.
Check the set-
tings.
The entered user name or pass-
word does not match that speci-
fied for LDAP server
authentication. Make settings correctly for the
user name and the password for
LDAP server authentication.
Exceeded max.
number of search
results which
can be dis-
played. Max.:
nnn
(A figure is placed at
n.)
The number of search results has
exceeded the maximum number
of items that can be displayed. Search again after changing the
search conditions.
LDAP server
search timed
out. Check the
server status.
A network error has occurred and
connection has failed. Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of [System Set-
tings]
. See “Administrator Tools”,
General Settings Guide.
Specified group
contains some
invalid dest. Do
you want to se-
lect only valid
dest.?
The specified group contains
some destinations for sending by
e-mail and some destinations for
sending by Scan to Folder. To select destinations for sending
by e-mail, press [Select] for the
message displayed on the e-mail
screen. To select destination for
sending by Scan to Folder, press
[Select]
for the message displayed
on the Scan to Folder screen.
Message Cause Solution