Ricoh 3030 - Manual (Page 13)

Control Panel
5
1
23. {Start} key
Press to start faxing, or printing reports,
or lists.
Reading the Display
The display guides you through operations, shows messages, machine status,
and destinations registered in the destination lists. See “Fax Destination”, Gen-
eral Settings Guide.
If you press the {Facsimile} or {Clear Mode} key during operation, this machine
enters fax standby mode.
Each function name displayed acts as a selection key, which you can touch to se-
lect or specify the function.
When a function is selected or specified, the function name is highlighted like
this
. When a function cannot be selected or specified, the function
name is grayed out like this .
Note
❒ This machine automatically returns to standby mode if you do not use the
machine for a certain period of time. You can select the period using the Fac-
simile Auto Reset Timer. See “Timer Settings”, General Settings Guide.
❒ You can have the machine return to default mode after each transmission us-
ing [Scan End Reset] under Gen. Settings/ Adjust. See p.145 “General Set-
tings/Adjustment”, Facsimile Reference <Advanced Features> .
RussianC4-AE_Combine-F_FM.book Page 5 Friday, April 15, 2005 11:13 AM