Ricoh Aficio AP610i - Manual (Page 108)

G1168611A_1.10 Copyright © 2004, 2005 108
Appendix
Moving and Transporting the Printer
Repack the printer in its original packing materials for transporting.
❒ Be sure to disconnect all cables from the printer before transporting it.
❒ The printer is a precision piece of machinery. Take care to avoid damage dur-
ing shipment.
❒ If the optional paper feed unit is installed, remove it from the printer, and then
move them separately.
Moving the Printer
Moving the printer in the short distance
A
Be sure to check the following points:
• The power of the printer is turned off.
• The power cable is unplugged from the wall outlet.
• The interface cable is unplugged from the printer.
B
If the external options are installed, remove them.
See Setup Guide and follow the steps backwards for removing options.
C
Be sure to close the Bypass Tray and the front cover.
• When lifting the machine, use the inset grips on both sides. Otherwise the
printer could break or cause injury if dropped.
• When you move the printer, remember to unplug the power cord from the
wall outlet to avoid a fire or an electric shock.
• When you pull out the plug from the socket, grip the plug to avoid damaging
the cord and causing a fire or an electric shock.
• The machine weight is approximately 20 kg (44.1 lb.).
• When lifting the machine, use the inset grips on both sides. Otherwise the
printer could break or cause injury if dropped.
• Before moving the machine, unplug the power cord from the outlet. If the
cord is unplugged abruptly, it could become damaged. Damaged plugs or
cords can cause an electrical or fire hazard.