Ricoh Aficio AP610i - Manual (Page 44)

Replacing Consumables and Maintenance Kit
44
Replacing the Maintenance Kit
The maintenance kit contains parts for maintaining the printer.
Replace the maintenance kit if the following message appears on the display:
Before Replacing
Replace all the parts included in Maintenance Kit at the same time. Replace
them according to the following procedure.
A
Turn off the power, and then unplug the power cable.
❒ Wait at least an hour after power off to allow internal parts to cool down be-
fore replacing the Maintenance Kit.
B
Check the box contains the following items:
• Friction Pad
× 3
See p.45 “Replacing the Friction Pad” .
• Transfer Roller (with gloves)
See p.47 “Replacing the Transfer Roller” .
• Paper Feed Roller
× 3
See p.50 “Replacing the Paper Feed Rollers” .
• Fusing Unit
See p.53 “Replacing the Fusing Unit” .
• Do not risk electric shock by handling the power cord or plug with wet
hands.
• The inside of this printer becomes very hot. Do not touch parts labelled “v”
(indicating a hot surface). Touching these parts will result in burns.
• Grip the plug, not the cord, when pulling the plug from the socket. Pulling
the cord causes wear and tear that can result in fire or electric shock.
• Wait at least one hour after power off before replacing parts. Not allowing
the printer to cool may result in burns.
Replace
Maintenance Kit