Ricoh Aficio AP610i - Manual (Page 29)

Paper and Other Media
29
For control panel settings when using thick paper, OHP transparencies, or
post cards, see
p.30 “Specifying a paper type for the Bypass Tray” .
Specifying custom size paper for the Bypass Tray
❒ The settings of custom sized paper that take effect are not the settings made
on the control panel but the settings made in the printer driver. There is no
need to change the settings on the control panel. However, when using a
printer driver other than RPCS, you will need to change the settings on the
control panel.
❒ Applications that do not allow a custom paper size to be set cannot print on
custom sized paper.
❒ If you print on A3 or longer sheets, prints may become blurred.
A
Press the {Menu} key.
The [Menu] screen appears on the display.
B
Press the {U} or {T} key to display [Paper Input], and then press the {#
Enter} key.
The paper selection menu appears.
C
Check [Bypass Size] appears, and then press the {# Enter} key.
The paper size selection menu appears.
D
Press the {U} or {T} key to display [Custom Size], and then press the {#
Enter} key.
Menu:
Paper Input