Cleaning the registration roller – Ricoh Aficio AP610i User Manual

Page 67

Advertising
background image

Cleaning the Printer

67

Cleaning the Registration Roller

If the registration roller is dirty, a misfeed might occur. In this case, clean the roll-
er as follows:

Clean the registration roller if dots (caused by specks of paper stuck to the roller)
appear on printed OHP transparencies.

A

Turn off the power, and then unplug the power cable.

B

Open the front cover by pushing the front cover release button.

C

Pull the toner cartridge out of the printer by holding the grips of the car-
tridge.

❒ Do not hold the toner cartridge upside down or stand it vertically.

Be sure to turn off the power and wait for about 30 minutes before

cleaning the registration roller. Not waiting for the printer to cool
down can result in a burn.

The inside of this printer becomes very hot. Do not touch parts labelled “v

(indicating a hot surface). Touching these parts will result in burns.

Advertising
This manual is related to the following products: