Ricoh Aficio AP610i - Manual (Page 80)

Troubleshooting
80
Ready The default ready message.
The printer is ready to use. No action required.
Remove Misfeed
Duplex Unit
/ Open Duplex
Unit Cover
There is misfeed in the Duplex
Unit. Remove the misfed paper.
See p.104 “When “Remove Misfeed
Duplex Unit” Appears” .
Remove Misfeed
Internal Path
/ Open
Front Cover
There is a misfeed in the print-
er. Remove the misfed paper.
See p.96 “When “Remove Misfeed In-
ternal Path” Appears” .
Remove Misfeed
Paper Exit Cover
/ Open Paper
Exit Cover
There is a misfeed in the paper
exit cover. Remove the misfed paper.
See p.99 “When “Remove Misfeed
Paper Exit Cover” Appears” .
Remove Misfeed
Paper Tray
/ Pull out Tray
Paper is jammed in the speci-
fied input paper tray. Remove the misfed paper.
See p.94 “When “Remove Misfeed
Paper Tray” Appears” .
Remove Paper
Standard Tray
The standard tray is full, and
the print job is suspended. Remove paper from the standard tray,
and the print job will be resumed auto-
matically.
Replace
Maintenance Kit
It is time to replace the mainte-
nance kit (friction pad, paper
feed roller, transfer roller and
fusing Unit). Replace the new maintenance kit.
See p.44 “Replacing the Maintenance
Kit” .
Replace
Toner Cartridge
The toner cartridge is not set
correctly or toner is almost run
out. Set the toner cartridge correctly.
See p.39 “Replacing the Toner Car-
tridge” .
The toner dust is full. Prepare a new toner cartridge. If the
image density gets too light, replace
the toner cartridge with a new one.
See p.39 “Replacing the Toner Car-
tridge” .
Reset Duplex
Unit correctly
A communication error sent
from the system unit to the du-
plex unit. Set the duplex unit correctly. If the
problem persists, call your service
provider.
Messages/Second
messages Description Solution