Ricoh Aficio AP610i - Manual (Page 61)

Cleaning the Printer
61
Cleaning the Friction Pad
If the friction pad is dirty, a multi-feed or a misfeed might occur. In this case, clean
the pad as follows:
A
Lift the paper tray slightly, and then pull it out until it stops. Lift the front
side of the tray, and then pull it out of the printer.
B
Place the tray on a flat surface. When there is paper in the tray, remove
paper.
C
Wipe the brown part of the friction pad with a soft damp cloth. Then,
wipe it with a dry cloth to remove the water.
❒ Do not use chemical cleaner or organic solvent such as thinner or ben-
zene.