Ricoh Aficio AP610i - Manual (Page 16)

Paper and Other Media
16
Loading Paper
This describes how to load paper into the paper tray and bypass tray.
Loading Paper in Tray 1 and the optional paper feed unit
The following example explains loading procedure for the standard paper tray
(Tray 1). The same procedure can be used for the optional paper feed unit.
❒ Make sure paper is not stacked above the limit mark inside the tray. Misfeeds
might occur.
❒ Do not put different types of paper in a single paper tray.
❒ Up to 500 sheets of paper can be loaded in the paper feed unit. This means
a maximum of 1,600 sheets can be simultaneously loaded when two addition-
al paper feed units are installed.
A
Lift the paper tray slightly, and then pull it out until it stops.
B
Lift the front side of the tray, and then pull it out of the printer.
• Do not pull out the paper tray forcefully. If you do, the tray might fall and
cause an injury.