Ricoh 4506 - Manual (Page 161)

149
5. What to Do if Something
Goes Wrong
If Your Machine Does not Operate as You
Want
Check the following:
Condition Action
Nothing happens when
the operation switch is
turned on. Is the main power switch turned on?
→ Turn on the main power switch.
B Paper tray is empty.
Load paper.
⇒ P.154 “ B Loading Paper”.
D Toner container is al-
most empty. Or toner con-
tainer is empty.
Add toner.
⇒ P.156 “ D Changing The Toner Cartridge”.
M Doors/covers are open. Close the doors/covers.
x Misfeed occurs.
Remove misfed paper. ⇒ P.161 “ x Clearing Misfeeds”.
d The machine instructs
you to add staples. Add staples.
⇒ P.164 “d Adding Staples”.
The machine instructs you
to enter your user code. The machine is set for user code mode. Enter your user code.
⇒
P.179 “General Features”.
The Energy Saver indica-
tor is on. Your machine is in Energy Saver mode.
→ Press the {Energy Saver} key. ⇒ P.49 “Energy Saver Mode”.
Misfeeds occur frequently. Is the right kind of paper in the paper tray?
→ Paper size and weight must be within the specifications for this
machine.
Is folded, wrinkled, damp, or curled paper in the paper tray?
→ Always use dry, undamaged paper.
Is the paper properly set in the paper tray?
→ Always load paper correctly.
Are there any pieces of misfed paper or other foreign objects in the
machine?
→ Make sure that the paper path is completely clear of paper and
other material after a misfeed.
Staples do not come out at
all. There are jammed staples in the stapler.
→ Remove the jammed staples. ⇒ P.166 “e Removing Jammed Sta-
ples”.
After loading a new staple cartridge, staples might not be ejected
the first few times you try to use the stapler.
E or H or L is lit
Contact your service representative.