Ricoh 4506 - Manual (Page 72)

Copying
60
2
E
Enter the vertical ratio with the number keys, then press the [#] key.
F
Set your originals, then press the
{{{{Start}}}} key.
Directional Size Magnification (mm)
1.
Horizontal original size
2.
Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
The suitable reproduction ratios will be automatically selected when you enter
the horizontal and vertical lengths of the original and copy image you require.
Note
❒ You can enter sizes within the following ranges:
❒ If the calculated ratio is over the maximum or under the minimum ratio, it is
corrected within the range of the ratio automatically. However, with some ra-
tios, parts of the image might not be copied or blank margins might appear
on copies.
copy27.tif
GCDHEN2E
3
1
2 4
Gcdhen2e.eps
Metric Version 1 - 999mm (in 1mm steps)
Inch Version 0.1" - 99.9" (in 0.1" steps)