Ricoh 4506 - Manual (Page 19)

7
Operation Panel
1.
Touch panel display
You can see the operation status and
messages here.
2. Screen Contrast knob
You can change the brightness of the dis-
play.
3. {{{{User Tools}}}} key
Press to change the default setting.
⇒
P.173 “User Tools”.
4. {{{{Adjustment}}}} key
Press to adjust the image or color balance,
or to make user colors.
⇒ P.103 “Adjust-
ment and Color Memory”.
5. {{{{Program}}}} key
Press to select the program mode.
⇒ P.51
“Program”.
6. {{{{Clear Modes}}}} key
Press to clear the previously entered set-
tings.
7. {{{{Interrupt}}}} key
Press to make interrupt copies.
⇒ P.50
“Interrupt copying”.
8. {{{{Energy Saver}}}} key
Press to enter/exit the Energy Saver
mode.
⇒ P.49 “Energy Saver Mode”.
9. {{{{Counter}}}} key
Press to display the total number of cop-
ies made.
10. Main Power indicator
This indicator goes on when the main
power switch is turned on, and goes off
when the switch is turned off.
11. On indicator
This indicator goes on when the opera-
tion switch is turned on, and goes off
when the switch is turned off.
12.
Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off).
13. {{{{Clear/Stop}}}} key
Press to cancel the copy number entered.
While copying, press to stop copying.
This key is also used to clear data.
14. {{{{Start}}}} key
Press to start copying.
15. {{{{#}}}} key
Press to enter data in selected modes.
16. Number keys
Use to enter the desired number of cop-
ies. They are also used to enter data.
Zcms011n.eps