Energy saver mode auto off mode, P.49 “energy saver mode, Energy saver mode – Ricoh 4506 User Manual
Page 61: Auto off mode
Basic Procedure
49
2
Energy Saver Mode
If you do not operate the machine for a certain period after copying or press the
{Energy Saver} key, the display goes out and the machine enters Energy Saver
mode. When you press the
{Energy Saver} key again, set originals in the docu-
ment feeder or open the platen cover or document feeder, the machine returns
to the ready condition. In Energy Saver mode, the machine uses less electricity.
A
Press the
{{{{Energy Saver}}}} key to enter Energy Saver mode.
Note
❒ To exit this mode, press the {Energy Saver} key again.
Auto Off Mode
This machine automatically turns itself off 60 minutes after the last copy or print
job has finished. If you wish to make copies when the machine is in Auto Off
mode, press the operation switch.
Reference
For how to change the default interval that the machine waits before entering
Auto Off mode, see “Auto Timer”
Tlcs100n.eps