Ricoh 4506 - Manual (Page 196)

Changing the Machine's Settings
184
6
Duplex/ADF/Sorter
Inkjet Output Mode
Setting Specifies the type of image adjustment for Inkjet Output mode.
• 1 – emphasize yellow
• 2 – emphasize red and yellow
• 3 – emphasize red and blue
If you want to emphasis yellow, select 1.
If you want to emphasis red and yellow, select 2.
If you want to emphasis red and blue, select 3.
Note
❒ Default: 1
Menu Description
Duplex Tray Auto
Clear When making two-sided copies from one-sided originals, if the last
original is an odd page, the last copy will be automatically delivered
with the reverse side blank. You can cancel this setting.
Note
❒ Default: On
SADF Auto Reset
Timer When you set one original at a time in the document feeder, the Auto
Feed
indicator lights for a selected time after an original is fed to show
that the document feeder is ready for another original. The time can be
set from 1 second to 99 seconds.
Note
❒ Default: 5 seconds
ADF Thin paper Use when changing the type of originals to be fed. Select this function
to avoid damaging thin originals (40 - 52g/m
2 , 11-14 lb) set in the doc-
ument feeder.
Note
❒ Default: Off
ADF Mixed Sizes By default, you cannot set originals of different sizes at one time in the
document feeder. You can cancel this setting.
Note
❒ Default: Off
❒ If you select [On], the copying speed will be reduced.
❒ When setting different length originals, all originals must be flush
with the back fence of the document feeder.
❒ Smaller originals might be skewed a little.
ADF Auto Paper Se-
lect By default, Auto Paper Select is selected when you set originals in the
document feeder. You can cancel this setting.
Note
❒ Default: On
Menu Description