Ricoh 4506 - Manual (Page 38)

Copying
26
2
D
Press the
{{{{Start}}}} key.
Note
❒ To stop the machine during a multi-copy run, press the {Clear/Stop} key.
❒ If you want to change the settings, press the {Clear/Stop} key. If you want
to resume the copy run, press the
{Start} key.
❒ To return the machine to the initial condition after copying, press the {Clear
Modes
} key.
Adjusting Copy Image Density
Image density affects the contrast of copies. With these functions you can control
the image density so that copies match originals. Make the selection you require
then set your originals and press the
{Start} key.
Auto image density
The machine automatically controls the image density.
A
If Auto Color Select mode is selected, select other color modes to cancel it.
⇒ ⇒ ⇒ ⇒ P.28 “Selecting a Color Mode”.
B
Press the [Auto Image Density] key.
Tlcs060n.eps
copy6.tif