Subaru Robin Power Products RG2800I - Manual (Page 26)

– 23 –
5-3) DISASSEMBLY PROCEDURES
5-3-1 SIDE COVER (L) and (R)
Take off the four bolts and remove the side cover (L)
and (R) from the frame.
M6 20mm Cover Bolt 4 pcs.
Tools : Screw driver
5-3-2 STARTER HANDLE
Make a knot on the recoil starter rope inside the side cover
in order to prevent the rope from being fully rewound into
the starter.
Rewind the knot at the rope-end inside the starter handle to
remove the handle.
5-3-3 FUEL PIPES, FUEL STRAINER and BATTERY CABLES
(1) Turn the engine switch to “STOP” position to close
the fuel cock.
(2) Disconnect the two fuel pipes from the fuel strainer.