Subaru Robin Power Products RG2800I - Manual (Page 48)

– 45 –
5-4-21 AUTO THROTTLE
(1) Connect the wires to Auto Throttle Unit of the
carburetor.
(2) Temporarily connect the choke cable to the
carburetor choke lever.
5-4-22 FUEL TANK
(1) Install the fuel tank onto the frame. Be sure to insert
the mount rubbers between the tank and the frame.
M6 x 20mm Flange bolt : 4 pcs.
Mount Rubbers : 4 pcs.
5-4-23 CLAMPING OF THE CHOKE CABLE AND
GROUND WIRES
Clamp the choke cable and ground wires using a wire
band.
(2) Attach two pieces of Rubber Seal (Tank).
(3) Attach the Sponge Seal (Muffler).
Auto-throttle
coupler
Regulator
(4) Install the regulator to the battery box.
M6 x 8mm Flange bolt : 1 pce.
Wire band
Fuel tank
Tightening torque : 4.0-6.0 N m
40-60 kgf cm
(3.0-4.4 ft lbs)