Olympus IX81 - Manual (Page 15)

10
IX81
The button functions shown below are the initial setups for PC control (remote operation).
The button functions can also be assigned as required by the user. For the assignment, refer to the instructions for the IX2-
BSW IX Software.
After setting up the button functions, attach the provided stickers near the buttons. For the function abbreviations and
symbols on the stickers, see the following table.
Objective escape/shelter button
Focusing (UP) button
Focus Adjustment Knob Unit U-FH
Abbreviations & Symbols Function Note
Fine/Coarse switching
Set/cancel photo voltage
Microscope (frame)/U-FH switching of
focus adjustment knob
Z-focusing motor ON/OFF OFF: Electrical noise reduction
Escape/return objective
Shutter IN/OUT
Condenser top lens IN/OUT Not used with the IX81.
Up/down operation for brightness ad-
justment, objective, etc. The function name can be written
in the blank area using an oil-ink
pen.
Left/right operation of mirror unit, filter
wheel, etc.
Transmitted light ON/OFF
Coarse/fine adjustment
switching button
Focusing (DOWN) button
Auxiliary button
Connector
Connect to the U-IFFH.
Focus adjustment knob