Olympus IX81 User Manual

Page 16

Advertising
background image

11

TRANSMITTED LIGHT BRIGHTFIELD

OBSERVATION PROCEDURE

}The following flow shows the operating procedure for the transmitted light brightfield observation which is the basic obser-

vation method of this microscope. The operating procedures for phase contrast observation and DIC observation will be
described separately in Chapter 5, “OTHER OBSERVATION METHODS” on page 28.
For the fluorescence observation, refer to the separate instruction manual entitled “Reflected Fluorescence System”.

(Controls Used)

(Page)

Start observation.

Set the main switch to “ I ” (ON).

1Main switch: “ I ” (ON)

(P. 13)

2Transmitted light ON-OFF button: ON

(P. 13)

Disengage the DIC slider and
analyzer from the light path.

Disengage the filter other than the
frost filter from the light path.

3Filter pocket

(P. 21)

Engage a 10X objective in the light path.

7Objective switching button

(P. 14)

Select the brightfield observation by pressing
the BF button* and select the (observation)
light path.

4BF observation button*
5Light path selector button

(P. 13)

Place the specimen on the stage.

6X-axis and Y-axis knobs

(P. 17)

Bring the specimen in focus.

8Focusing knob (dial)

(P. 15)

Focus adjustment knob or
focusing button

Adjust the brightness.

9Light intensity control buttons

(P. 13)

Adjust the interpupillary distance.
Adjust the diopter.
Adjust the light axis.

aBinocular tube

(P. 18)

bDiopter adjustment ring

(P. 18)

cCondenser height adjustment knob

(P. 23)

dCondenser centering knobs

(P. 23)

eField iris diaphragm lever

(P. 22)

Engage the objective to be used in the light
path and bring the specimen in focus.

7Objective switching button

(P. 14)

8Focusing knob (dial)

(P. 15)

Focus adjustment knob

Adjust the aperture iris and field iris diaphragms.

fAperture iris diaphragm lever

(P. 25)

eField iris diaphragm lever

(P. 22)

Engage the required filters.

3Filter pocket

(P. 21)

Adjust the brightness.

9Light intensity control buttons

(P. 13)

* Usable when the DIA OBS setting is made in the IX2-BSW (Ver. 01.03 or later) software.

Advertising