Oce North America TDS700 - Manual (Page 20)

20 Chapter 2 Walk-up user
Turn on and off the Océ TDS700
Illustration
[11]
[11] On/off switch on the flexible scanner
Turn on and off the flexible scanner
1. Set the On off switch to position ‘1’. The green LED turns on. The message Ready
to scan’ appears.
2. Set the On/off switch to position ‘0’.
Illustration
[12]
[12] On/off switch on the productive scanner
Turn on and off the productive scanner
1. Set the On/off switch at the front of the scanner to position ‘1’. The green LED turns
on. The message Ready to scan’ appears.
2. Set the On/off switch at the front of the scanner to position ‘0’.