Oce North America TDS700 - Manual (Page 40)

40 Chapter 2 Walk-up user
Solve paper jams on the printer and scanner
Solve paper jams on the printer and scanner
Introduction
When a paper jam occurs on the printer, the display indicates the following
information.
■
The nature of the problem.
■
The location of the problem.
■
The solution to the problem.
Paper jams on the printer
An attention light will flash above the printer operator panel when operator attention
is required.
A buzzer can be activated to alert the operator whenever operator intervention is
needed.
Normally the paper moves through the system without problems. On the graphic
display a cover or door indicates in which part of the system the paper has stopped.
The display guides you through a sequence of steps to correct the problem. If a jam
occurs in more than one location, the display will continue to instruct you until all
jammed paper has been removed. If you corrected the error the display gives
instruction how to continue the job.
Stickers on some parts of the system indicate which green handles, green knobs,
green bars and covers, etc. you have to lift, press or open to remove any jammed
paper.
Paper jams on the scanner
When a paper jam occurs on the scanner a message will appear on the scanner
operator panel of the productive black and white scanner and a red light will start to
flash at the flexible colour scanner. You can open the top cover and remove the
jammed original. For more instructions please refer to the Océ TDS700 Reference
manual.