Oce North America TDS700 - Manual (Page 28)

28 Chapter 2 Walk-up user
Do a basic print job
Do a basic print job
How to print a drawing on the Océ TDS700
1. Create the document in your application.
2. Select your printer.
3. Define the document format for the selected printer by defining the Page size. In the
Page size list you can select a standard Page size, or select a Custom size previously
registered.
4. Display the application preview if the function is available.
Note: The preview only takes into account the settings available in the application.
It does not display the driver transformation settings ('Mirror', 'Rotation',
'Alignment', 'Shift'...).
5. Select File - Print.
6. Send the document directly for printing.
Instead, you can also open 'Properties' to access the printer settings. Then you can
modify the driver settings, attach a user identification to the output using the
accounting option, define the number of copies, set the layout and image quality
before printing.
Result
The document is printed on the Océ TDS700.