Oce North America TDS700 - Manual (Page 25)

25
Do a basic copy job
How to copy on the productive scanner
1. Place your original face-down, right aligned along the original guide. Keep the
legend at your right hand side.
2. Feed the original.
Note: When you feed the original, keep it in place until it is transported (about 1
cm) into the machine.
[17]
3. Press the green start key.
Result
The scanner makes a copy. The copy is sent to the Océ TDS700 printer and will be
printed immediately or stored in the 'Waiting jobs' workspace of the Océ TDS700
Power Logic
® controller application.