Oce North America TDS700 - Manual (Page 65)

65
Concept of the scanner templates
'Templates' on the productive scanner
With a template you can pre-define the settings you need for a copy or scan job. You
only need to set the job settings once and you can store the settings in a template that
is presented on the scanner operator panel. You can re-use the template for each next
job without the need to redefine all the settings every time. The scanner operator
panel of the productive scanner offers 4 templates for scan-to-file or copy jobs. The
scanner operator panel also displays a template with the settings you used last. This
Last used template is only visible on the local scanner operator panel. It cannot be
displayed in the 'Templates' area of the Océ TDS700 Power Logic
® controller
application.
The templates function supports the green key principle: the user only needs to select
a template and start a job with the required settings instead of having to define all the
settings manually for every job.
For each template you can define the following items. The template definition is
managed by a dedicated user, for example the repro operator in the Océ TDS700
Power Logic
® controller application.
[23]
Illustration
The illustration below shows the available copy and scan-to-file templates on the
scanner operator panel of the productive scanner.
[37]
[37] Available templates on the scanner operator panel of the productive scanner
[23] Template details
Name Description
'Template
name' Give each template a unique name.
'Template
description' Give additional information about the template and / or its
settings.
'File' mode Select one of three output types for each template.
'Custom Card' Allows you to put together on one card the 5 settings that you
require, in the order that you prefer.
'Original',
'Print' and
'File' cards Define the settings in the cards.