Quadra-Fire QVI-35FB-S - Manual (Page 37)

Quadra-Fire • QVI-35FB-S • 2178-900 Rev. B • 12/08 37
B. Vent Kits Components
Direct Vent Flex Liner Kits (see Figure 15.2)
LINK-DV-30B or (LINK-DV-30): Masonry 3 inch fl ex liner
kit. Expands to 30 feet. Includes: two liners, termination
cap, fl ashing, and link adapter.
LINK-DV4-30B or (LINK-DV4-30): Masonry 3 inch fl ex liner
kit. Expands to 30 feet and 4 feet respectively. Includes:
two liners, termination cap, fl ashing, and link adapter.
Figure 15.2 Direct Vent Flex Liner Kits
Figure 15.3 Direct Vent Flex Liner Accessory Kits
Direct Vent Flex Liner Accessory Kits (see Figure 15.3)
Flash-Damp: Zero clearance damper fl ashing kit for use
with LINK-DV30B or LINK-DV4-30B liner kits.
LINK-ZC-ADP: Zero clearance chimney adapter
SVRLINK-ADP: Adapter kit (colinear to coaxial 3 inches
included in above kits). It is permissible to use SRVLINK-
ADP to connect collinear fl ex vent to SL-D vent pipe to
extend the run.
FLEX3-30: One 3 inch fl exible liner expands to 30 feet.
FLEX3-30/2: Two 3 inch fl exible liners expands to 30 feet
each.
FLEX-CNCT: Connector kit - 3 inch liner to 3 inch liner,
one connector per kit.
FLASH-DAMP
FLEX3-30
FLEX3-30/2
LINK-DV4-30B
(LINK-DV4-30)
LINK-DV-30B
(LINK-DV-30)
LINK-ZC-ADP
SVRLINK-ADP
FLEX3-CNCT