C. clear space, E. fixed glass assembly, D. decorative doors, fronts and surrounds – Quadra-Fire QVI-35FB-S User Manual

Page 8: G. before lighting fireplace

Advertising
background image

Quadra-Fire • QVI-35FB-S • 2178-900 Rev. B • 12/08

8

C. Clear Space

WARNING! DO NOT place combustible objects in front
of the fi replace or block louvers. High temperatures may
start a fi re. See Figure 2.2.

Avoid placing candles and other heat-sensitive objects on
mantel or hearth. Heat may damage these objects.

Figure 2.2 Clear Space

E. Fixed Glass Assembly

See Section 12.G.

D. Decorative Doors, Fronts and Surrounds

WARNING! Risk of Fire! Install ONLY doors, fronts or
surrounds approved by Hearth & Home Technologies.
Unapproved doors or fronts may cause appliance to over-
heat.

This appliance has been supplied with an integral
barrier to prevent direct contact with the fi xed glass
panel. DO NOT operate the appliance with the barrier
removed.

Contact your dealer or Hearth & Home Technologies if
the barrier is not present or help is needed to properly
install one.

For more information refer to the instructions supplied with
your decorative door or front.

F. Remote Controls, Wall Controls and Wall

Switches

Follow the instructions supplied with the control installed
to operate your fi replace:

For safety:

• Install a switch lock or a wall/remote control with child

protection lockout feature.

• Keep remote controls out of reach of children.

See your dealer if you have questions.

CLEAR SP

ACE

3 FT

. IN FRONT OF FIREPLACE

G. Before Lighting Fireplace

Before operating this fi replace for the fi rst time, have a
qualifi ed technician
:

• Verify all shipping materials have been removed from

inside and/or underneath the fi rebox.

• Review proper placement of logs, ember material and/or

other decorative materials.

• Check the wiring.

• Check the air shutter adjustment.

• Ensure that there are no gas leaks.

• Ensure that the glass is sealed and in the proper position

and that the integral barrier is in place.

WARNING! Risk of Fire/Asphyxiation! DO NOT oper-
ate fi replace with fi xed glass assembly removed.

Advertising