True Manufacturing Company TAC-36 - Manual (Page 25)

............ www.truemfg.com ............
True Food Service Equipment, Inc.
23 23
K-ohm SCL 1C ADO
C F SPL (X-32 ) / 1.8 AHM
-40 -40 195.652 SPH (X-32) / 1.8 AHT (X-32) / 1.8
-35 -31 148.171 SP (X-32) / 1.8 ACC
-30 -22 113.347 C-H IISM
-25 -13 87.559 HYS (X) / 1.8 IISL (X-32) / 1.8
-20 -4 68.237 CRT IISH (X-32) / 1.8
-15 5 53.650 CT1 IISP (X-32) / 1.8
-10 14 42.506 CT2 IIHY (X) / 1.8
-5 23 33.892 CSD IIFC
0 32 27.219 DFM HDS
5 41 22.021 DFT IIDF
10 50 17.926 DH1 SB
15 59 14.674 DH2 DS
20 68 12.081 DH3 DI2
25 77 10.000 DH4 STT
30 86 8.315 DH5 EDT
35 95 6.948 DH6 LSM
40 104 5.834 DLI (X-32) / 1.8 OA1
45 113 4.917 DTO OA2
50 122 4.161 DTY 2CD
55 131 3.535 DPD INP
60 140 3.014 DRN OS1 (X) / 1.8
65 149 2.586 DDM T2
70 158 2.228 DDY OS2 (X) / 1.8
75 167 1.925 FID T3
80 176 1.669 FDD (X-32) / 1.8 OS3 (X) / 1.8
85 185 1.452 FTO TLD
90 194 1.268 FCM SIM
95 203 1.145 FDT (X) / 1.8 ADR
100 212 0.974 FDH (X) / 1.8
105 221 0.858 FT1
110 230 0.758 FT2
115 239 0.671 FT3
120 248 0.596 ATM
125 257 0.531 ALA (X-32) / 1.8
AHA (X-32) / 1.8
ALR (X) / 1.8
AHR (X) / 1.8
ATI
ATD
All Parameters with formula above need to be
converted for Celsius applications.
If current SPL is set for 20 degrees F the formula is (X-32) / 1.8
LAE Controller Parameter Settings Resistance Readings
for LAE Probes for Celsius
(20-32) / 1.8 = -6.7 Celsius
Example:
Temperaure
SUB
JEC
T T
O C
HA
NG
E
We want to make it very clear that all parameter set points on the LAE controller have been set at the factory to
optimize performance and adjusting any of these parameters in the field will affect the cabinet’s performance
and could void the Warranty.