TMC EV4500 - Manual (Page 101)

87
Setting the Night Message On/Off by Line
To set the Night Message
On/Off by Line:
1 Press P.
- The display will read
“
Program...”
2 Press the soft key under ANSW.
3 Press the soft key under NEXT until
“ Advanced Setting” appears in
the display, and then press the soft
key under
ENTER.
- The display will read “ AA OGM 2-8
Setup.”
4 Press the soft key under NEXT
repeatedly, until ” Night Msg by Ln”
appears in the display, and then
press the soft key under
ENTER.
The display will show the current
Night Message setting for Line 1.
5 Press the soft key under CHANGE if
you wish to change the Night
Message setting for Line 1.
The choices are:
L1 NIGHT MSG:ON (factory setting)
L1 NIGHT MSG:OFF
6 Press the soft key under NEXT to
see the current Night Message set-
ting for Line 2, and repeat steps 5
and 6 to change the Night Message
settings for Lines 2-4.
7 Press P to exit.
If you do not wish to have a night message on all
your lines, you may turn the night message
OFF
on any or all of your lines, so that the day mes-
sage will play at all hours.
This feature is useful for example if you have a
round-the-clock business. In this case you would
turn the night message
OFF on all lines. Or you
may have a personal line that shares the system
with the business lines. In this case you would
turn
OFF the night message for that particular
line.
Answering System
Advanced Auto Attendant Features
EV4500 UG combined v52 in PDF order 101005.qxd 10/10/2005 4:54 PM Page 101