TMC EV4500 - Manual (Page 84)

70
Setting Message Length
To set Message Length:
1 Press P.
- The display will read
“
Program...”
2 Press the soft key under ANSW.
3 Press the soft key under NEXT
repeatedly, until ” Message Length”
appears in the display, and then
press the soft key under
ENTER.
The display will show the current
Message Length setting.
4 Press the soft key under CHANGE
repeatedly, until the desired
Message Length setting is dis-
played.
The choices are:
Length:UNLIMITED
Length:1 MINUTE
Length:ANNC ONLY
5 Press P to exit.
This setting determines the maximum length of
messages that callers can record at your phone.
There are three possible settings:
UNLIMITED: If you choose this setting, callers
can record a message of any length, up to the
available memory in your phone.
1 MINUTE: Callers will be able to record a mes-
sage up to 1 minute long.
ANNC ONLY: Callers will hear the OGM, but will
not be able to record a message.
Answering System
Setting Up and Operating Your Telephone’s Answering System
Message Length
BACK ENTER NEXT
(factory setting)
EV4500 UG combined v52 in PDF order 101005.qxd 10/10/2005 4:53 PM Page 84