TMC EV4500 - Manual (Page 97)

83
Choosing the Zero-Out Action
To choose the Zero-Out
Action:
1 Press P.
- The display will read
“
Program...”
2 Press the soft key under ANSW.
3 Press the soft key under NEXT until
“ Advanced Setting” appears in
the display, and then press the soft
key under
ENTER.
- The display will read “ AA OGM 2-8
Setup.”
4 Press the soft key under NEXT
repeatedly, until ” Zero-Out
Action” appears in the display, and
then press the soft key under
ENTER.
5 Press the soft key under CHANGE
repeatedly, until the desired Zero-
Out Action is displayed.
The choices are:
AA Zero-Out OGM (factory setting)
RING STN #11 through #26
GLOBAL RING #30 through #38
DISALLOW
6 Press P to exit.
When the caller dials “0” during an Auto
Attendant message, the factory setting is that it
plays the Zero-Out OGM. However, you may
choose a different Zero-Out action if you wish.
You may set the phone to transfer to a particular
extension, ring all the phones with a particular
distinctive ring (so you know the caller has dialed
“0”), or even disallow the caller to zero-out.
You may decide exactly what happens
when callers dial “0” at the auto attendant
Answering System
Advanced Auto Attendant Features
Zero Out Action
BACK ENTER NEXT
EV4500 UG combined v52 in PDF order 101005.qxd 10/10/2005 4:54 PM Page 97