Status clear and memory clear operations, Status clear – Toshiba TEC MA-186 User Manual
Page 110
- 104 -
EO1-11115
MA-186-100 SERIES
Use the S Key to turn the Control
Lock to “BLIND”.
23. Status Clear and Memory Clear Operations
The operations described in this chapter are provided for initial start-up of the machine or emergency but
not to be operated as part of daily routines. Do not perform any of these operations unless it is really
necessary.
Status Clear
The operation defined as “Status Clear” will only clear an error or key-locked condition that disables normal
operations (though it seldom happens). Thus neither the sales data nor the programmed data will be
cleared by a Status Clear (except that when a Status Clear is operated to clear a key-locked condition
during a sale, the sale item data already entered for the current sale will be cleared).
The Status Clear also has the function to obtain the condition “after all sales data resets” (as if all sales data
had been reset) but will not actually affect any sales data. Such a condition is required in some
programming operations and is usually obtained by taking the required reset reports. However, when you
do not want the sales data to be reset because it is still in the business hours,etc., this function of the Status
Clear will be effective. But be careful in using the function; depending on the programming item, sales data
resets may really be necessary instead of a Status Clear, to keep consistency between the programmed
data and the sales data.
Operating Procedure
Condition: Any time, outside or during any operation sequence
Operation: Remove the plug of the register’s power cord from the wall outlet (to turn OFF the power).
Status Clear Symbol Line
Date, Consecutive No., and
Time are not reset.
Zero-amount Display & Print Format
may vary depending on the designa-
tion in the last “Sales Memory Clear”
or “All Memory Clear” (refer to the
following pages.) Initial Format: 0.00
Z
OFF
X
REG
SET
(BLIND)
Thank you
Call again
05.- 28.- 9 7
0 0
★0.0 0
0 27.1
1 3 - 0 4
Plug in the cord (to turn ON the power).
A Status Clear receipt is issued.