Toshiba TEC MA-186 - Manual (Page 85)

- 79 -
EO1-11115
MA-186-100 SERIES
Address: 1 4
Initial SET Bit Nos.
→
4 5
Your Selection
→
(GST Options) ... for CANADA
Content
Bit
No.
Selective Status
RESET SET
1
2
3
4
5
6
7, 8
ADOPTED
NOT ADOPTED
(All bit status selections
below are disregarded)
GST Feature (for Canada only)
Fraction Rounding Process on GST Calculations.
Fraction Rounding Process on GST Calculations.
GST Amount Lines on Sales Receipts
PST & GST Amount Lines Print Format on Sales Receipts
(when Bit 4 is SET)
Sale amount subject to PST calculation
-- vacant --
ROUND OFF ROUND DOWN
PRINT NON-PRINT
CONSOLIDATED
AMOUNT LINE
SEPARATE LINES
INCLUDING GST EXCLUDING GST
Follow Bit 3 status. ROUND UP
Supplementary Description for Address 14:
Bit 2 & Bit 3: If both RESET, ROUND OFF status is obtained.
If both SET, Bit 3 status prevails, i.e., ROUND DOWN.
(For Fraction Rounding Process on Quantity Extension and % calculations, see
Address 2 - Bits 1 & 2. As for fraction rounding process on PST calculations, ROUND
OFF status is fixed.)
Bit 5: If SET status is selected, you can further select printing of PST 1 and PST 2 on one
consolidated line or separate lines. (See Address 13 - Bit 3.)
Bit 6: If SET status is selected, PST calculation is performed on the sale amount subject to
PST with GST excluded.
If RESET status is selected, PST calculation is performed on the sale amount subject
to PST with GST included.