Toshiba TEC MA-186 - Manual (Page 9)

- 3 -
EO1-11115
MA-186-100 SERIES
1
3. Outline of Preparation Procedure Before Operating the
ECR
This chapter shows the outline of set-up procedure of the ECR before actually starting the ECR operation.
Remove the cash register from the carton, referring
to Chapter 2. Unpacking on page 2. And take out all
the parts and accessories.
2
Remove the tapes and seals for holding parts or
protecting the register surfaces.
3
Plug the power cord of the register into a wall outlet.
Make sure that the outlet voltage matches that of the
power required for the register.
WARNING: Be sure to plug in the power cord first, then
insert the batteries.
4
Detach the Printer Cover and the Battery Cover, then
insert the batteries (3 pieces).
WARNING: Be certain to insert the batteries enclosed
in the package. If they are not inserted and
the power is turned OFF (including a
power failure occurrence), the sales data
and the programmed data will be cleared.
(1) (2) (3) (4) (5) (6) (7) (8) (9)
5
OFF Z
REG
X
SET
Insert the REG key into the Control Lock.