No-sale (exchange) – Toshiba TEC MA-186 User Manual
Page 35
- 29 -
EO1-11115
MA-186-100 SERIES
<operable outside a sale only>
The No-sale transaction is used to open the drawer without relating to a sale, for such purposes of giving
changes (to break a large-amount bill), checking the receipt/journal print condition, date or time accuracy,
etc. This operation must be performed outside a sale only.
NS
Thank you
Call again
05.- 28.- 9 7
★
0 10.2
0 9 - 1 0
NS
←
←
←
←
Date
No-sale Symbol
Receipt Consecutive No.
Time
←
Store Name Stamp
NS
(No-sale Key)
#/NS
(Non-add Number Print/No-sale Key)
............................. The drawer opens.
(or
)
NOTES: 1. Usually, Non-add Number entries are prohibited at the starting of a No-sale transaction (i.e. Non-
add Numbers cannot be printed on a No-sale receipt). However, a No-sale entry can be
programmed to be allowable after a Non-add Number entry. (Refer to Chapter “16. System
Option Setting”, Address 15-Bit 1 on page 80.)
2. The [#/NS] key operates and functions the same. When this key is depressed with a prior number
entry, it functions as the Non-add Number Print key. (Refer to the section of Non-add Number
Print on page 52.)
Z
OFF
X
REG
SET
#/NS
NOTE:
When data is already entered and printed (through a Department Key, etc.), it cannot be cleared by
the [C] key any longer. In need of deleting such data, see the following:
Item Correction (Last Line Voiding)
page 49
Void (Designated Line Voiding)
page 50
All Void (Transaction Line Voiding)
page 51
Furthermore, for details to clear various troubles and errors, refer to Chapter “22. Troubleshooting” on
page 100.
ALL
VOID
ITEM
CORR
VOID