Tally Genicom Matrix Printer - Manual (Page 11)

7265 Programmer’ Manual 7
Copyright © 2004 TallyGenicom en i c o Chapter 2 ANSI
Code Description
ESC [(p1);(p2)<SP>~ Select Emulation
ESC [(p)` Horizontal Position Absolute
ESC [(p)a Horizontal Position Relative
ESC [(p)d Vertical Position Absolute
ESC [(p)e Vertical Position Relative
ESC [(p1);(p2)f Vertical and Horizontal Position Absolute
ESC [(Ps)g Clear Tabs
ESC [(p1);...(pn)h Set Auto CR on LF
ESC [>(p1);...(pn)h Set Mode (GENICOM)
ESC [(p)j Horizontal Position Backwards
ESC [(p)k Vertical Position Backwards
ESC [(p1);...(pn)l Reset Auto CR on LF
ESC [>(p1);...(pn)l Reset Mode (GENICOM)
ESC [(P1);...(Pn)m Fonts and Print Modes (SGR)
ESC [(p1)p Select Paper Path
ESC [(p1)q Select Graphics Density
ESC [(p1);(p2);(p3)r Forms Setup
ESC [(p1);(p2)s Sets Left and Right Margins
ESC [(p1)t ENA/DIS Oversized/Expanded/Bar Code
ESC [(p1);(p2);...(p22)u Set Horizontal Tabs at Certain Positions
ESC [(p1);(p2);...(p12)v Set Vertical Tabs at Certain Positions
ESC [(p1);(p2);…} Set Bar Code Parameters
ESC [(p)x National Character Sets