Tally Genicom Matrix Printer - Manual (Page 282)

Horizontal Tab Stops ON CSI ... u
ESC H
Horizontal Tab Stops OFF (TBC) CSI ... g
Data Structure ASCII CSI n 1 "u" [A] set horizontal tab stop ➊
hex. 9B n 1 75
dec. 155 n 1 117
ASCII ESC "H" [C] set horizontal tab stop at current position ➋
hex. 1B 48
dec. 27 72
ASCII CSI n "g" [A] clear all horizontal tab stops ➌
hex. 9B n 67
dec. 155 n 103
Description ➊ Print width 8 inches Print width 13,6 inches
n
1
= 1... 80 at 10 cpi = 1...136 at 10 cpi
= 1... 96 at 12 cpi = 1...163 at 12 cpi
= 1...120 at 15 cpi = 1...204 at 15 cpi
= 1...136 at 17.1 cpi = 1...232 at 17.1 cpi
= 1...160 at 20 cpi = 1...272 at 20 cpi
Values for n
1
are valid for a line length of 8 inches (80-column printer) or 13.6 inches
(136-column printer) set in the menu.
Up to 16 tab stops can be joined in one sequence as follows:
CSI n
1
; n
2
; n
3
; ... ; n
16
u
The parameters do not have to be sorted. The positions of the horizontal tab stops depend
on the current character density.
➋ This sequence is interpreted as a Epson/IBM-sequence (ESC H =∧ LQ off), if the emula-
tion MTPL+Epson/IBM is set.
46 Print Positioning