Tally Genicom Matrix Printer - Manual (Page 251)

Character Spacing
Spacing Increment (SPI) CSI ... SP G
Data Structure ASCII CSI n 1 ";" n 2 SP "G" [B] [C] set spacing increment
hex. 9B n 1 3B n 2 20 47
dec. 155I n 1 59 n 2 32 71
Description n
1
specifies the line spacing
n
2
specifies the character spacing
The unit is expressed in decipoints or other units defined by SSU (Select Size Unit, see
page 8).
For this note also the sequence “Set Line Spacing (SLS)” on page 26.
Example:
CSI 120 ; 0 G =∧ 6 lpi, basic cpi
CSI 90 ; 60 G =∧ 8 lpi, 12 cpi
The default setting of the spacing increment normally is 10 cpi.
n = 0: The distance is reset to the values set in the printer menu.
Character Spacing 15