Tally Genicom Matrix Printer - Manual (Page 18)

7265 Programmer’s Manual 14
Copyright © 2004 TallyGenicom Chapter 2 ANSI
Commands Description
ESC ]6;4;
(p3);(p4)
ESC \
STRAPS AND OPTIONS
This command enables downline control of options found at various places in the
printer menus. This includes the Emulation and Software Options menus, as well as
the User-defined Options menu. For details and descriptions, see the User’s
Manual.
p3 =
0 reset
1
set
p4 = 4 auto cr on lf
5 auto lf on cr
6 auto cr on vt
14 auto wrap