Tally Genicom Matrix Printer User Manual
Page 152
Graphics Mode Reassignment
ESC ?
Data Structure
ASCII
ESC "?"
<s> <n>
reassign graphics mode
hex.
1B
3F
<s> <n>
dec.
27
63
<s> <n>
Description
This code sequence redefines one of the four alternate bit image codes ESC K, ESC L,
ESC Y or ESC Z as one of the bit density numbers used with the ESC * <m>... code
sequence.
Available values are:
s =
75, 76, 89, 90 (ASCII = K, L, Y, Z)
n = 0
single density
n = 1
double density
n = 2
double density, high speed
n = 3
quadruple density
n = 4
screen graphics
n = 5
plot graphics (1:1)
n = 6
screen graphics II
n = 7
plot graphics, double density
n = 32
single density
n = 33
double density
n = 38
screen graphics II
n = 39
triple density
n = 40
sixfold density
For example, if you send the following code before you run a graphics program, it will
change every instance of mode K (single density) to mode 3 (quadruple density):
LPRINT CHR$(27);"?K";CHR$(3);
Graphics
69