Tally Genicom Matrix Printer - Manual (Page 325)

Proportional Spacing (Draft) OFF CSI ? 51 h
Proportional Spacing (Draft) ON CSI ? 51
Data Structure ASCII CSI "?" "5" "1" "h" [A] disabling proportional spacing
hex. 9B 3F 35 31 68 in print quality DRAFT ➊
dec. 155 63 53 49 104
ASCII CSI "?" "5" "1" " " [A] enabling proportional spacing
hex. 9B 3F 35 31 69 in print quality DRAFT (default) ➋
dec. 155 63 53 49 105
Description ➊ This sequence disables proportional spacing for the print quality DRAFT. The printer
switches automatically to NLQ, if DRAFT and proportional spacing are selected.
➋ This sequence enables proportional spacing for the print quality DRAFT. It is the
default setting.
Font Selection for NLQ/LQ only CSI ? 52 h
Font Selection CSI ? 52
Data Structure ASCII CSI "?" "5" "2" "h" [A] print control ignores the font IDs of the
hex. 9B 3F 35 32 68 default character generator ➊
dec. 155 63 53 50 104
ASCII CSI "?" "5" "2" " " [A] print control does not ignore the font IDs
hex. 9B 3F 35 32 69 of the default character generator ➋
dec. 155 63 53 50 105 (default)
Description ➊ The font settings (CSI 10 ... 19 m) are only valid and can only be selected for the print
qualities NLQ and LQ.
➋ All print qualities (Draft, NLQ, LQ) are valid, if fonts are selected using sequence
CSI 10 ... 19 m. This is the default setting.
l
l
l
l
Miscellaneous 89