Tally Genicom Matrix Printer - Manual (Page 306)

Automatic Gap Adjustment (AGA) CSI ... + z
Direct Setting of the Print Head Distance CSI ... + y
Data Structure ASCII CSI n "+" "z" [B] automatic gap adjustment ➊
hex. 9B n 2B 7A
dec. 155 n 43 122
ASCII CSI n "+" "y" [B] direct setting of the print head distance ➋
hex. 9B n 2B 79
dec. 155 n 43 121
Description ➊ For the sequence CSI n + z the following parameters are available for n:
n hex. dec. Adjustment (automatic)
0 30 48 automatic adjustment OFF
(print head distance must be set at the printer)
1 31 49 automatic adjustment ON
➋ For the sequence CSI n + y the following parameters are available for n:
n hex. dec. Setting (direct)
0 30 48 Default value
(is set at the printer)
n print head distance in n -steps
Setting the print head distance accords to the respective paper path selected. Unit, adjust
range and default setting depend on the device used.
If the Automatic Gap Adjustment is set to ON, the sequence
➋ is ignored.
Example:
Settings of T2060: Unit = 10 Micrometers
Adjust range = 1 – 100
Default value = 18
70 Miscellaneous